Does not fit H600110 or Older Hadley H200170, H500210 or H500220 hubs

Special Tools Needed to install

Recommend using Hadley tools to remove existing end caps.

This kit will install with a Hadley 29mm pin spanner or adjustable pin spanner for replacing the lock rings.

Note: This conversion kit allows you to use a standard Hadley XC H600100 hub on a Boost 110mm x 15mm fork but the hub flanges will not be spaced as far apart as the Hadley Boost dedicated H700110 hubs, so you will not get the same lateral stiffness as the Hadley H700110 hubs.