Hadley Thru-Bolt 10mm X 171mm (135mm spacing Thicker Dropouts)

$48.00

10mm x 171mm Thru-Bolt (135mm spacing) + Nut

For 135mm spaced frames with thicker dropouts

Aluminum bolt and nut with Clear Anodize Finish

Fits Hadley 10mm Thru-Bolt Rear Hubs and any other 135mm x 10mm Thru-Bolt hubs

Uses one 6mm Bondhus/Allen wrench (hex key wrench) to install and remove, nut on right side has tab that fits in dropout to keep from spinning.

Hadley Part No: H500262-CLR

Quantity:

2 available

Add To Cart

10mm x 171mm Thru-Bolt (135mm spacing) + Nut

For 135mm spaced frames with thicker dropouts

Aluminum bolt and nut with Clear Anodize Finish

Fits Hadley 10mm Thru-Bolt Rear Hubs and any other 135mm x 10mm Thru-Bolt hubs

Uses one 6mm Bondhus/Allen wrench (hex key wrench) to install and remove, nut on right side has tab that fits in dropout to keep from spinning.

Hadley Part No: H500262-CLR

Will fit many frames with 10mm x 135mm spacing (longer bolt for thicker dropouts).

Clamping range 153mm - 155mm (outside frame dropout dimension)

Check with your frame manufacturer

Clear Anodize Finish

Torque to 16-18 Nm

10mm X 1.25mm X 171mm

Use grease on threads to prevent seizing and galling.